How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add another key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. Then saab key replacement derby and transponder have to be purchased and programmed to the car.
It is an excellent idea to rotate your keys so that one does not get worn out more quickly than the other. This will help to keep your keys in top condition.
Replacement Case
In contrast to the traditional Saab keys of old keys, the modern key fobs have electronics inside which makes it more difficult to copy. This has made car theft considerably more difficult than it was years ago. It has also made it more costly to replace keys that were lost.
Every owner of a Saab 9-3 must have at least two functioning keys. If one gets lost, it is expensive to purchase a new one for the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers will typically charge $100-$200 to complete this.
There are ways to avoid these costs. Some parts suppliers will find the code from an extra key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade for just a fraction of dealer cost. The key must, however, be the same as the original one in order to function in your car.
You can also replace the case yourself by following these steps. You will need a flathead screwdriver along with some patience. With the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. Once you have the case opened, take out the electronics and place them inside your new case. Insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive component that can be quickly and easily replaced. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery for the remote key fob in only four steps. This tutorial should work with any modern Saab key fob. However, the process may differ slightly.
The first step is to find the button that opens the backup key within the fob. This button is usually located just below the Saab logo on the back of the fob. Use a flathead to insert the screwdriver in the small hole on this button. This should be sufficient to open the case to allow you to change the battery.
Once the new CR1632 battery is installed it is possible to reassemble the remote key fob, and then program it to your car. The entire process should take no more than an hour at most. This is a very easy procedure that doesn’t require special tools.
The procedure is a little more complicated in the event that you lose your key, but still possible. The dealer must find the VIN number of the car and then order a replacement key blade and TWICE module with the correct unique code. After that, they’ll need to cut the replacement key and then program it with a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car, it has a battery inside. They have a limited life span and will eventually fail. This is a problem that occurs with all cars. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronics in place. It is easy to pop the case open and replace the batteries. You will need to remove the emergency key before you replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot in the middle of the. The screwdriver should be moved around the case, and it should split open, making it easier to take it out.
If you’re ready to change your keys, make sure you have an extra set on hand. This will save you a lot of money. If you have spare keys, you can ask the dealer cut an entirely new key and then program it to the car, which is cheaper than replacing the entire key fob.
If you do not have a spare key one, you can add a second key to your car, however this requires a lot of research and effort. The cost for adding a second key is several hundred dollars and it also requires the programming of the car’s computer. Professionals can do this but it’s not a cheap option.
Replacement Ignition
The new SAAB 9-3 has an advanced alarm system built around a key code. This means that in the event that you lose your only functioning key, getting another key can be extremely expensive since the car has to have a unique computer module added and it also needs to be specifically designed to accept a different key. Dealers can even charge hundreds of dollars to program a new key even if they’re unable to do it.
Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) when you lose your only working key. We can reprogram the current EEPROM of your car’s computer to make it ready to accept an additional key. This will save you more than 50% off the cost you would spend at an auto dealer.
If you have owned a SAAB 9-3 quite a while and you’re aware of the ignition keys aren’t very durable. They can get extremely sticky, and the buttons can fall off of them occasionally, so you should consider purchasing a new one if yours isn’t working as it should. It’s good to know that replacing the ignition key isn’t as complicated as it seems and is fairly easy to do with the proper tools.
